“We use the platform as a normal chair using a normal dental stool. I can see no reason why I should want to move the platform around”

David Townsend (Assistant Clinical Director)
Waterlooville Health Centre

The Standard Wheelchair Platform is a static floor mounted unit that was designed and developed by Design Specific engineers in conjunction with staff at Guy’s Hospital. It provides the ultimate tilt experience from a fixed, floor-mounted platform and presents the patient to the practitioner at a safe and comfortable working height.

Only minimal installation is required to create a dedicated area for disability dentistry. It can be positioned adjacent to a conventional chair and share treatment supplies and facilities.

The Standard Wheelchair Platform accommodates all types of wheelchair, including battery-operated models. It is open-sided, to enable close contact with the patient at all times, and is controlled either by a radio handset or conveniently positioned surface mounted switches.

The unit tilts up to 45° - ideal for placing the patient’s head at lap height - and will support up to 270 Kg. Constant, active microprocessor monitoring of the platform ensures complete safety while in the Standard Wheelchair Platform is in operation.

•	Mains or battery operated
•	Self contained - no trailing cables
•	Overnight recharge
•	Open sided for full access to the patient
•	High Comfort™ backrest can be adjusted when tilted
•	Alternative fixed chair based controls
•	Suitable for motorised and manual wheelchairs
•	Patients head at lap height using a conventional stool
•	Remote handset or fixed switch control
•	Tilts up to 45°
•	Supports up to 270 Kg
•	Microprocessor safety monitoring
•	Base sensors detect any obstructions
•	Size 1010mm x 1010mm x 350mm (WxDxH)

Features

Schematic